Loading
Metz Home Page
Established 1953 Distributors Log-In Contact Metz Metz Home Page
banner_lower
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com Drop Down Menu

Return to:

Home Page

Acidproofing & Industrial Flooring

Acidproofing & Industrial Flooring
Extra Heavy Duty Flooring (6mm+)

The Metz range of extra heavy duty flooring is suitable for demanding traffic and physical environments. Applied at greater thickness for increased durability, Metz can provide a system that will stand the test of time.

Jump to:

Metz 33-TG

Metz 10 Concrete

Metz 93PU-TG

Metz Korodur Monolithic Topping

Metz 33EN-TG

Metz 10EN

Metz 33-TG Metz 33-TG Data Sheet (PDF)
Metz 33-TG

Metz 33-TG is a trowellable epoxy flooring system used to produce a less textured heavy duty flooring solution. Normal applied thickness is 6 mm. Application is by hand or power trowel.

Typical Uses: Industrial Flooring, Food & Beverage plant floors.

Metz 10 Epoxy Concrete Metz 10 Epoxy Concrete Data Sheet (PDF)
Metz 10 Epoxy Concrete

Metz 10 Epoxy Concrete is an epoxy based polymer concrete. It is used to replace severely attacked concrete or can be applied to new concrete in areas subject to extreme mechanical stresses. Often used as an underlayment beneath other Metz monolithic flooring products.

Typical Uses: Metal Production Plants, Chemical Plants, Food Plants.

Metz 93PU-TG Metz 93PU-TG Data Sheet (PDF)
Metz 93PU-TG

Metz 93PU-TG is an outstandingly tough, abrasion, temperature, impact and chemical resistant trowellable polyurethane flooring system used in a wide variety of industrial applications. Normal application thickness is 6 – 8 mm.

Typical Uses: Chemical Plants, Food Plants, Breweries, Dairy Industry.

Metz Korodur Monolithic Topping Metz Korodur Monolithic Topping Data Sheet (PDF)
Metz Korodur Monolithic Topping

Metz Korodur Monolithic Topping is a premixed (just add water on site) concrete topping mix laid 8-15mm thick over fresh concrete to produce extremely hard wearing floors.

Typical Uses: Workshops, Warehouses, Production Areas, Hangars.

Metz 33EN-TG Metz 33EN-TG Data Sheet (PDF)
Metz 33EN-TG

Metz 33EN-TG is an epoxy novolac trowellable flooring formulation exhibiting greater resistance to highly corrosive chemicals than most epoxies. Normal applied thickness is 6 mm. Application is by hand or power trowel.

Typical Uses: Oil Refineries, Acid Plants, CIP Rooms, Bunded storage areas.

Metz 10EN Metz 10EN Data Sheet (PDF)
Metz 10EN

Metz 10EN is an epoxy novolac polymer concrete used to place over new or old concrete in areas subject to severe chemical attack. It can be used to cast pump plinths, kerbs etc without the need for further protection against chemical attack.

Typical Uses: Oil Refineries, Acid Plants, Mine Sites, Mineral Processing.

Terms & Conditions of Sale | Privacy Policy |

Home | About Metz | Acid Proofing and Industrial Flooring | Data Sheets | Specialty Ceramic Tiles | Contact | Terms of Use |